gc_chahiye
09-27 01:42 PM
^^^^^^^ bump
Appreciate any advice...thanks
habils advice is best at this point: try to get a quota-exemp H1 (if you cant extend your F1 and study some more)
Appreciate any advice...thanks
habils advice is best at this point: try to get a quota-exemp H1 (if you cant extend your F1 and study some more)
wallpaper famous funny poems
reddymjm
05-01 10:01 AM
I had applied for labour in 2001 and also applied for i 140 and i 485 in 2002 .My h1 had exausted 7 years and since my i 94 was becoming in valid i was suggested by my lawyer to either stay here in usa without job and wait till i get the reciept notice and ead from uscis .Since financially my situation was very tight with a baby on the way .i decided to leave for india .Now i am here again since last 4 years .When i was in india i asked my lawyer if we can do any thing like counsalar processing etc (here in this case i had paid huge amount to the lawyer,i was paying for my gc process ).the lawyer told me that nothing can be done as he has withdrawn the i 140 .
Now after 2 years i came (or had to come back) to usa .my new employer started the ggc process this year .Since i needed full information of my previous process to complete the forms i contacted old lawyer .he send me the papers and i was so shocked to see that they did not withdraw any thing my i 140 was approved 4 months after i left and my fingerprinting is due since 2002 .I just wish my lawyer had told me the truth .we could have cp or come back .
it took a day for me to overcome the frustration of what had happened .
and now my major concern is 1.that with one case pending ,i dont know how it is going to effect the new case
2.is there any thing i can do to reopen my old case .
Take a paid consultation with Murthy.com if you can ask for Murthy only.
Good Luck.
Now after 2 years i came (or had to come back) to usa .my new employer started the ggc process this year .Since i needed full information of my previous process to complete the forms i contacted old lawyer .he send me the papers and i was so shocked to see that they did not withdraw any thing my i 140 was approved 4 months after i left and my fingerprinting is due since 2002 .I just wish my lawyer had told me the truth .we could have cp or come back .
it took a day for me to overcome the frustration of what had happened .
and now my major concern is 1.that with one case pending ,i dont know how it is going to effect the new case
2.is there any thing i can do to reopen my old case .
Take a paid consultation with Murthy.com if you can ask for Murthy only.
Good Luck.
Danko
11-27 04:26 AM
I find that Silverlight and related .NET stuff works extremely well cross-platform. Apps like Banshee (http://banshee-project.org/) are cross-platform (really, not like Flash and AIR which suck on Linux and Mac) and work wonderfully on every platform (alright, bad example: there�s not a Windows port at the moment, because of the underlying audio libraries, but it�s all C# stuff).
Mono is implementing a really nice open-source version of Silverlight (I forget its name), and Silverlight works great on Mac.
Hmm... I didn't know about AIR issues you mentioned.. ;( On PC it works great, and people at Adobe (as I can see on videos) use Mac OS as their primary OS.
btw considering Mono... We had an ASP.NET app that had to be ported to Linux.. We did it with Mono, but... there were huge problems with memory leaks.. So colleague had to rewrite it completely in PHP.. So, my (bad) experience tells me not to use .NET on Linux... Perhaps they fixed it though? Ugh, somehow I don't believe that Microsoft cares for any other OS but its own.. ?
Mono is implementing a really nice open-source version of Silverlight (I forget its name), and Silverlight works great on Mac.
Hmm... I didn't know about AIR issues you mentioned.. ;( On PC it works great, and people at Adobe (as I can see on videos) use Mac OS as their primary OS.
btw considering Mono... We had an ASP.NET app that had to be ported to Linux.. We did it with Mono, but... there were huge problems with memory leaks.. So colleague had to rewrite it completely in PHP.. So, my (bad) experience tells me not to use .NET on Linux... Perhaps they fixed it though? Ugh, somehow I don't believe that Microsoft cares for any other OS but its own.. ?
2011 famous funny poems.
thediablo
05-30 03:19 PM
oh MAN! THIS SUCKS
i think Soul site really sucks. :D
i think Soul site really sucks. :D
more...
gparr
November 25th, 2005, 04:38 PM
My primary tip is patience. When the wind is blowing, even slightly, if you're patient you will start to get in tune with the wind and be able to pick out the calm moments that always occur. You just have to be ready and then get off as many shots as possible during that calm moment. I shoot as many of my flower shots as I can very early or very late in the day. By very early, I mean at or just after sunrise. The wind is usually calm for a short while until the sun starts to heat the admosphere. I've had considerable success shooting in the very soft light at or after sunset, when the wind also calms. Long shutter speeds though. Unfortunately, too many blooms aren't open until the sun is higher in the sky and you have to resort to patience.
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
for_gc
04-27 11:25 AM
Hi,
I am in a unique situation as far as capture of earlier PD is concerned.
My company had filed an LC for me in EB3 with PD of Oct '03.
I get fed up waiting for that and got another LC filed with PD Nov 05 in EB2.
I have got my I140 approved for the same and also 3yr ext. based on that as well.
My EB3 LC is approved as well now.
My question to somehow capture the PD of my EB3 LC.
Is it possible ? Is anyone in the same boat ?
Regards.
I am in a unique situation as far as capture of earlier PD is concerned.
My company had filed an LC for me in EB3 with PD of Oct '03.
I get fed up waiting for that and got another LC filed with PD Nov 05 in EB2.
I have got my I140 approved for the same and also 3yr ext. based on that as well.
My EB3 LC is approved as well now.
My question to somehow capture the PD of my EB3 LC.
Is it possible ? Is anyone in the same boat ?
Regards.
more...
alterego
05-09 07:54 PM
The Employer won`t be touching the I-140 or any other related GC apps.About the time frame for getting same or similar job...I am seriously keeping my fingers crossed!!!!
Thanks for all the detailed inputs alterego !!!
Best advise. Try your best to have an AC21 compatible job offer by Aug/Sept time frame. I doubt you'll see any issues emerging before then.
Your status is legal as long as your 485 is pending. A job will secure your status. Work hard finding a same or similar one.
Thanks for all the detailed inputs alterego !!!
Best advise. Try your best to have an AC21 compatible job offer by Aug/Sept time frame. I doubt you'll see any issues emerging before then.
Your status is legal as long as your 485 is pending. A job will secure your status. Work hard finding a same or similar one.
2010 famous funny poems
tonyHK12
11-30 09:14 PM
We need to get all these businesses to join together with Immigration voice and support us by lobbying and funding.
No Great H-1b will come here if its going to take 10-20 years to get a Green card.
I would suggest, lets have another action item to write to these companies about IV and ask for their help for Legal Immigrants that everyone needs.
This is a big thing that is missing so far.
See how the president of the Agricultural board, unions appear on TV asking for support for illegals and also get invited to Congress.
No Great H-1b will come here if its going to take 10-20 years to get a Green card.
I would suggest, lets have another action item to write to these companies about IV and ask for their help for Legal Immigrants that everyone needs.
This is a big thing that is missing so far.
See how the president of the Agricultural board, unions appear on TV asking for support for illegals and also get invited to Congress.
more...
reachinus
10-31 10:20 AM
They usually issue the I-94 till the validity of the Petition or expiry of the Passport in some cases. In my case i had a valid stamp from May 2004 till Jan 2006, but I had a new H1 from a new employer in Oct 2004 which was approved till Jan 2007 and when I entered US in may 2005 I was issed a new I-94 till Jan 2007 even though the stamp will expire in Jan 2006.
Hope this helps.
your I-94 mess up will not affect your travel on AP. If you have a valid visa stamp (or intend to get one), you can still come back in H1B too. It may be advisable you maintain H1b by returing in H1B visa.
.......
They issue I-94 based based only on the expiry of the visa stamp.
Hope this helps.
your I-94 mess up will not affect your travel on AP. If you have a valid visa stamp (or intend to get one), you can still come back in H1B too. It may be advisable you maintain H1b by returing in H1B visa.
.......
They issue I-94 based based only on the expiry of the visa stamp.
hair famous funny poems
immi_seeker
10-02 10:02 AM
just spoke with someone yesterday whose PD was april 2005. he files 485 in september 2005 before eb2 retrogressed.
he got his GC in august 2007. now how is that possible when i still see people wth PD of 2004, whose GC is pending. also btw, in august 2007 and in july 2007 the eb2 was U.
anyone can explain that please?
PD is important in asllocating visa numbers. An immigrant visa will be allocated only if pd is current. other background process like namecheck, fp etc shud happen irrespective of pd
he got his GC in august 2007. now how is that possible when i still see people wth PD of 2004, whose GC is pending. also btw, in august 2007 and in july 2007 the eb2 was U.
anyone can explain that please?
PD is important in asllocating visa numbers. An immigrant visa will be allocated only if pd is current. other background process like namecheck, fp etc shud happen irrespective of pd
more...
jsb
02-06 12:24 PM
Cris,
I just called teh number and was able to talk to the officer.. he said the case under review.. means.. Any idea.
Thanks again.
As others have replied, "under review" means, it is somewhere in the stacks of files. They may not even know where it is.
I just called teh number and was able to talk to the officer.. he said the case under review.. means.. Any idea.
Thanks again.
As others have replied, "under review" means, it is somewhere in the stacks of files. They may not even know where it is.
hot famous funny poems
it is ok
01-08 11:20 AM
Hi:
While sending passport for Renewal, do I have to attach I-94, too alongwith Old Passport, or should I remove it..I am sending it by Certified Copy..
Thanks,
While sending passport for Renewal, do I have to attach I-94, too alongwith Old Passport, or should I remove it..I am sending it by Certified Copy..
Thanks,
more...
house famous funny poems. famous funny poems. famous
delax
08-03 01:08 PM
I remember very clearly from last year that NOT having an A# on your approved I-140 is not a problem - Sheela Murthy was very clear about this on her calls for her clients. The 485 receipt though should have an A#.
FP is a different story. You have to get it done for 485 approval.
Disclaimer: My approved I-140 has an A# that matches the A# on the 485 receipt
FP is a different story. You have to get it done for 485 approval.
Disclaimer: My approved I-140 has an A# that matches the A# on the 485 receipt
tattoo famous funny poems
zigma
04-04 07:14 AM
All the posts that I have seen on the forum are related to what we should ask for regarding ammendments and changes to the proposed bills.
Why don't we also offer our services in return for quick approval????
This is part of the idea that I had a while back after listening to Prez. Bush's address to the nation. He said that the fed will increase funding to increase the number of Science and Maths teachers. Well, why don't we offer our services. Anyone working in the STEM fields shall have to work for say 4 hours a week at local schools teaching Science/ Maths, etc. We know all desis can do that. Most have an engineering background or are good at math anyways.
This way the government can
1. solve the teacher shortage problem
2. provide more students (future generations) with the education
3. can actually show that legal immigrants add value to society at the grass root level
I am sure that we can and do much more, but most is not directly visible to the population. This has the potential to provide a big impact.
Why don't we also offer our services in return for quick approval????
This is part of the idea that I had a while back after listening to Prez. Bush's address to the nation. He said that the fed will increase funding to increase the number of Science and Maths teachers. Well, why don't we offer our services. Anyone working in the STEM fields shall have to work for say 4 hours a week at local schools teaching Science/ Maths, etc. We know all desis can do that. Most have an engineering background or are good at math anyways.
This way the government can
1. solve the teacher shortage problem
2. provide more students (future generations) with the education
3. can actually show that legal immigrants add value to society at the grass root level
I am sure that we can and do much more, but most is not directly visible to the population. This has the potential to provide a big impact.
more...
pictures Seriously Funny: Poems
ivar
02-07 09:43 AM
Congrats ivar - you are now a free man!!
My humble request - please do contribute to the cause that held you back for so long. If not financially, then through your efforts in advocacy & legislator meetings - every little bit counts.
GCHope2011, I haven't stopped contributing yet and planning to continue my contribution (Donation) for a while (maybe another 6 months). I have this habit of visiting IV everyday, so i am checking back today.
My humble request - please do contribute to the cause that held you back for so long. If not financially, then through your efforts in advocacy & legislator meetings - every little bit counts.
GCHope2011, I haven't stopped contributing yet and planning to continue my contribution (Donation) for a while (maybe another 6 months). I have this habit of visiting IV everyday, so i am checking back today.
dresses famous funny poems. famous
GCBy3000
04-15 07:35 PM
I agree as long as you have filed your 485 and 180 days is passed. But in my case, I have not even crossed the labor stage. It was pending with BEC when my company asked me to move. I tried a lot to convince my attorney thinking that I might miss the boat of 485 if at all it becomes current, but it did not help.
THe LPR clearly states that it will become void if any of the below changes.
1. Job description
2. Location
3. Something else, I dont remeber.
The above will not come into effect, if you had crossed 180 days of 485.
Also my attorney told that USCIS will not be able to find from where I file from 485, but it is risk on my part when I go for naturalization. Also if for some reaosn a RFE is issued, any company will tell the truth and the beneficiary will be in trouble. So it is always better to file a new labor unless the beneficiary is intened to move back to original location during the adjucation process and stays at that location for 6+ months.
I dont understand how you got away with this one after changing the location. With your example, the locational requirement of LPR does not make sense at all. Anybody can file LPR anywhere and move anywhere as long as 485 takes more than 180 days. One can deliberately file 485 with improper documentst to delay the approval and getaway. Double check with your attorney on this one and playing safe is not bad idea at all with the current USCIS mess and immigration laws.
AGAIN, I THINK WHEN YOU FILE YOUR 485 you have to be working in the location as stated in your LPR AS PER THE LAW, eventhough USCIS will not be able to find it. Before PERM, there was a column to state the beneficiary will work anywhere in US. But this not available anymore with PERM. The bottom line is the strongest part of LPR, "THE LOCATION", does not make sense at all.
By making you file for new labor, your attorney has played it too safe. In your case, filing a new labor was not neccesary. Please read below and check with an immigration lawyer for advice. I AM NOT A LAWYER but this advice is based on 2 different lawyers I have talked to regarding my own case where I moved from Phoenix, to Reno after my labor was filed.
Here is the deal when changing the location while GC is pending:
1. You can change location during your pending GC. But your job description must not change. Also, you have to move back to the location where your GC was filed, ONLY IF your 485 is processed and approved in less than 180 days from filing (I dont think USCIS will ever be that efficient and process 485 petitions in less than 180 days). That's because your option of AC21 of changing employers and locations (within the same job description, you cant work at a gas station or McDonalds) kicks in after 180 days of filing 485. If your 485 is approved in less than 180 days, then yes, you have to go back to the original location where your Greencard was filed because you dont have the AC21 options of switching employers and locations during your 485 stage ... which is available ONLY AFTER 180 days have passed in the processing of your 485 file.
So as long as your 485 takes longer than 180 days, you can continue to work at your new location even though you GC and labor was filed at a previous location.
2. After 180 days of filing 485, you can change employers using your EAD and change locations. No limit. But it has to be the same job description. You cannot start working as a manager if your Greencard was filed for the position of a programmer.
THe LPR clearly states that it will become void if any of the below changes.
1. Job description
2. Location
3. Something else, I dont remeber.
The above will not come into effect, if you had crossed 180 days of 485.
Also my attorney told that USCIS will not be able to find from where I file from 485, but it is risk on my part when I go for naturalization. Also if for some reaosn a RFE is issued, any company will tell the truth and the beneficiary will be in trouble. So it is always better to file a new labor unless the beneficiary is intened to move back to original location during the adjucation process and stays at that location for 6+ months.
I dont understand how you got away with this one after changing the location. With your example, the locational requirement of LPR does not make sense at all. Anybody can file LPR anywhere and move anywhere as long as 485 takes more than 180 days. One can deliberately file 485 with improper documentst to delay the approval and getaway. Double check with your attorney on this one and playing safe is not bad idea at all with the current USCIS mess and immigration laws.
AGAIN, I THINK WHEN YOU FILE YOUR 485 you have to be working in the location as stated in your LPR AS PER THE LAW, eventhough USCIS will not be able to find it. Before PERM, there was a column to state the beneficiary will work anywhere in US. But this not available anymore with PERM. The bottom line is the strongest part of LPR, "THE LOCATION", does not make sense at all.
By making you file for new labor, your attorney has played it too safe. In your case, filing a new labor was not neccesary. Please read below and check with an immigration lawyer for advice. I AM NOT A LAWYER but this advice is based on 2 different lawyers I have talked to regarding my own case where I moved from Phoenix, to Reno after my labor was filed.
Here is the deal when changing the location while GC is pending:
1. You can change location during your pending GC. But your job description must not change. Also, you have to move back to the location where your GC was filed, ONLY IF your 485 is processed and approved in less than 180 days from filing (I dont think USCIS will ever be that efficient and process 485 petitions in less than 180 days). That's because your option of AC21 of changing employers and locations (within the same job description, you cant work at a gas station or McDonalds) kicks in after 180 days of filing 485. If your 485 is approved in less than 180 days, then yes, you have to go back to the original location where your Greencard was filed because you dont have the AC21 options of switching employers and locations during your 485 stage ... which is available ONLY AFTER 180 days have passed in the processing of your 485 file.
So as long as your 485 takes longer than 180 days, you can continue to work at your new location even though you GC and labor was filed at a previous location.
2. After 180 days of filing 485, you can change employers using your EAD and change locations. No limit. But it has to be the same job description. You cannot start working as a manager if your Greencard was filed for the position of a programmer.
more...
makeup famous funny poems. ydikoloved: famous funny poems- Beautiful woman Acne
noone2day78
02-19 08:11 AM
ohh is this really true? can u specify a source for this ?
^^^^^^^^^^^^^
^^^^^^^^^^^^^
girlfriend famous funny poems. famous funny poems. famous; famous funny poems. famous
vallabhu
11-13 04:35 PM
I am done with Finger Prints on sep25th which i received on sep6th.
hairstyles famous funny poems. famous
pointlesswait
06-17 11:30 AM
i know that there was post on the forum what to say..when you call..cant find it now..
can anyone post the link here..plz!
Don't think that your call doesn't matter.. They do take the number of person called for the same issue and this is the response i got from CHC Dennis Cardoza's office...
Dennis Cardoza : Well aware of the bills, i was number 15 for friday the 13th and when i asked for total number, she said we have received 100 or so calls for these bills....
And two or three lawmakers office said that we are reviewing the bills at the moment.. so definitely a positive sign...
So grab your phone and reach out to house reps... Just try to call 2 members and i bet that you will finish the rest of the calls and you'll reply to my message so you can share your experience and encourage others.
can anyone post the link here..plz!
Don't think that your call doesn't matter.. They do take the number of person called for the same issue and this is the response i got from CHC Dennis Cardoza's office...
Dennis Cardoza : Well aware of the bills, i was number 15 for friday the 13th and when i asked for total number, she said we have received 100 or so calls for these bills....
And two or three lawmakers office said that we are reviewing the bills at the moment.. so definitely a positive sign...
So grab your phone and reach out to house reps... Just try to call 2 members and i bet that you will finish the rest of the calls and you'll reply to my message so you can share your experience and encourage others.
gccovet
09-04 10:12 AM
Question : If I get H1 transferred to NEWEMP (basically work on H1 and NOT EAD), and CURREMP revokes I-140, will this effect my GC process. I intend to work on H1 and keep on renewing EAD based on i-485 filed. NEWEMP will be providing AC21 letter which will be send to USCIS after I join them.
NO, I-485 filing > 180, also the I-140 is approved.
1. Will there be any effect to my GC process in case CURR Company revokes I-140?
No. if you send AC21 letter, you will not receive NOID (you might get RFE)
2. Can I keep on renewing EAD even though I would work on H1 with NewEMP?
Yes
Here is my thought -
If you are on H1B until Dec 2009, you will have to file H1B Extention for 7th Year (I am guessing you are in your second h1B renewal). For any reason if you get denial for I-485, your H1B extention will also be cancelled, remember extention was given to you on the basis of pending I-485 (GC).
so after DEC 2009 , it's the same wheather you are on EAD or H1B Extention.
Let say if you start using EAD now, you will have 1 yr 5 months left on your H1B. if there is something wrong with I-485, you can file H1B from different employer (this will not count against quota, as you have unsed 1 yr 5 month left on your H1B), go out of country and come back on H1B (you have more than 1 year left you can start another GC process :))
just my thought, you might want to validate this with any leagal expert.
Thank you Amit for your response.
GCCovet
NO, I-485 filing > 180, also the I-140 is approved.
1. Will there be any effect to my GC process in case CURR Company revokes I-140?
No. if you send AC21 letter, you will not receive NOID (you might get RFE)
2. Can I keep on renewing EAD even though I would work on H1 with NewEMP?
Yes
Here is my thought -
If you are on H1B until Dec 2009, you will have to file H1B Extention for 7th Year (I am guessing you are in your second h1B renewal). For any reason if you get denial for I-485, your H1B extention will also be cancelled, remember extention was given to you on the basis of pending I-485 (GC).
so after DEC 2009 , it's the same wheather you are on EAD or H1B Extention.
Let say if you start using EAD now, you will have 1 yr 5 months left on your H1B. if there is something wrong with I-485, you can file H1B from different employer (this will not count against quota, as you have unsed 1 yr 5 month left on your H1B), go out of country and come back on H1B (you have more than 1 year left you can start another GC process :))
just my thought, you might want to validate this with any leagal expert.
Thank you Amit for your response.
GCCovet
viper673
06-08 01:27 PM
I did think about doing it this way, but it didn't feel the "right thing to do"...
I spoke to my lawyer on what to do , but I'm not getting a straight answer.
Do you guys recommend a lawyer that would be able to help?
I checked Murthy.com and she asks for $250/20min of consultation... Is she that good? Should I consider calling her?
I spoke to my lawyer on what to do , but I'm not getting a straight answer.
Do you guys recommend a lawyer that would be able to help?
I checked Murthy.com and she asks for $250/20min of consultation... Is she that good? Should I consider calling her?
No comments:
Post a Comment